Wilson Electronics Cell Phone Amplifiers
Check them out here-- http://www.wheelersoffroad.com/wilsonelectronics.htm
The Wilson Mobile Wireless Amplifier Kit with Phone Cradle includes everything you need to begin enjoying improved cellular performance in mobile applications. We have found that this will greatly improve your cell phone performance when you're off road in weak cellular signal areas. If it can get a whiff of a cell tower signal it will lock on like a blood hound. Using this kit will amplify the signals to and from the cell phone that you place in its cradle, and will extend the range of other phones or cellular data cards in the vehicle as well. Power is supplied to the unit via a cigarette/aux power cord that can be hardwired if desired. The cradle has three different mounting options. The kit includes the 12" magnet mount outside antenna which will collect the signal from the cell tower and send it through the cable to the mobile wireless dual band amplifier. The amplifier’s state of the art technology is designed to increase your signal up to 10 times, reduce disconnects and dropouts, and increase data communication rates needed for 3G technologies. The amplified signal is sent to the Cell Phone Cradle Plus which has the inside vehicle antenna built right in. Your cell phone or data card then communicates with the improved signal. When the cell phone or data card transmits, the signal goes through the cradle antenna, is then boosted by the amplifier and broadcasts back to the cell tower through the outside antenna. Most importantly, the Cradle Plus provides a convenient place to stow a phone and allows the driver to keep both hands on the wheel while using the phone, greatly increasing safety. Also great for safely holding your phone while you're driving through rough terrain. Works really neat with your bluetooth earpiece, too. This kit includes three mounting options for installing the cradle on the dash or console of your vehicle. Wilson offers a 30 day guarantee and a 1 yr warranty, see the link below for further info and installation instructions. MADE IN THE USA