Ok so me and The Roadie worked on making a gas tank skid plate this weekend. I took his idea and went a few levels up. The lower plate is 3/16" steel and the up-rights and side supports are 1/4" steel. Having the side supports allows for little to no deflection in the plate. The strap that runs side to side ties the frame back together and offers more support for the plate. Under the muffler it is double plated to get strength and rigidity coming to a thickness of 1/2".The main plate has two 1" drain holes up front to allow larger debris to evacuate and the rear has two 5/8" holes for water. Both sets of holes are behind the cross braces to protect from intrusion. Pictures will be up as soon asap. Thanks again from NEILAGE INC.
PICTURES HERE > viewtopic.php?f=9&t=298
FUEL TANK ARMOR
Forum rules
All posts in this section pertain to our vendor:
20 posts
• Page 1 of 1
Last edited by Trail X on Mon Nov 23, 2009 5:22 pm, edited 2 times in total.
Reason: Added link to pictures.
Reason: Added link to pictures.
NEILAGEINC.com
- NeilageInc
- Member
- Posts: 84
- Joined: Thu Sep 10, 2009 12:08 am
- Location: CA, El Cajon
- Name: Neil Talmadge
- Vehicle Year: Other
- Vehicle: Other Vehicle
- DriveTrain: 4WD
You can sign me up for one, Neil 
Right after the front skid setup, maybe after I get back.
Right after the front skid setup, maybe after I get back.-
teebes - Founder
- Posts: 1052
- Joined: Thu Sep 03, 2009 1:05 am
- Location: CA, San Diego
- Name: Teebes
- Vehicle Year: 2002
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ Aftermarket Locker
- Rank: Expedition Rated
man id love to see some pics!!!
- Zero
- Veteran
- Posts: 1048
- Joined: Thu Sep 10, 2009 5:07 pm
- Location: Los Angeles, CA / Toronto, ON
- Name: Brendan
- Vehicle Year: 2005
- Vehicle: Chevrolet Trailblazer EXT
- DriveTrain: 4WD w/ G80
- Rank: Offroad Rated
- NeilageInc
- Member
- Posts: 84
- Joined: Thu Sep 10, 2009 12:08 am
- Location: CA, El Cajon
- Name: Neil Talmadge
- Vehicle Year: Other
- Vehicle: Other Vehicle
- DriveTrain: 4WD
That thing is friggin' bombproof.
My hat is off to you good sir
My hat is off to you good sir
Time. . .is my greatest enemy.
-
bobbyblaze - Trail-Blazer
- Posts: 343
- Joined: Thu Sep 10, 2009 10:31 pm
- Name: bb
- Vehicle Year: 2002
- Vehicle: Other Vehicle
- DriveTrain: 4WD
- Rank: Offroad Rated
WHAT!?! Did somebody steal my pics?!?!?Zero wrote:man id love to see some pics!!!
Hint: Read ALL threads.
-
The Roadie - Founder
- Posts: 5011
- Joined: Mon Sep 07, 2009 11:29 pm
- Location: CA, Vista, San Diego County
- Name: Bill Carton
- Vehicle Year: 2004
- Vehicle: GMC Envoy
- DriveTrain: 4WD w/ G80
- Rank: Expedition Guide
I'm heading over to Neil's to get some fuel tank armor this weekend 
If anyone else has been thinking about ordering one, ping Neil so they can knock out multiple copies 
If anyone else has been thinking about ordering one, ping Neil so they can knock out multiple copies
-
teebes - Founder
- Posts: 1052
- Joined: Thu Sep 03, 2009 1:05 am
- Location: CA, San Diego
- Name: Teebes
- Vehicle Year: 2002
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ Aftermarket Locker
- Rank: Expedition Rated
Darn it. I thought Neil was BUSY this weekend. Now I know why women HATE to share their favorite babysitter's number. Oh, wait. YOU answered Neil's ad, and I stole some of his time from YOU. Ooopsie. 
Carry on.
Carry on.-
The Roadie - Founder
- Posts: 5011
- Joined: Mon Sep 07, 2009 11:29 pm
- Location: CA, Vista, San Diego County
- Name: Bill Carton
- Vehicle Year: 2004
- Vehicle: GMC Envoy
- DriveTrain: 4WD w/ G80
- Rank: Expedition Guide
Neil... do you work with aluminum too?
My two worries are the shipping cost, and the weight.
I'd be 10x happier keeping all of my armor aluminum. Plus, for us here in the northeast, we won't have to worry about rusting issues.
My two worries are the shipping cost, and the weight.
I'd be 10x happier keeping all of my armor aluminum. Plus, for us here in the northeast, we won't have to worry about rusting issues.
-
Trail X - Founder
- Posts: 9925
- Joined: Mon Sep 07, 2009 10:22 pm
- Location: VA, Roanoke
- Name: James Downing
- Vehicle Year: 2005
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ Aftermarket Locker
- Rank: Expedition Guide
JamesDowning wrote:Neil... do you work with aluminum too?
My two worries are the shipping cost, and the weight.
I'd be 10x happier keeping all of my armor aluminum. Plus, for us here in the northeast, we won't have to worry about rusting issues.
Can you clarify what you mean by "rusting issues". Your talking about aluminum correct?
- bgwolfpack
- Veteran
- Posts: 1794
- Joined: Fri Sep 18, 2009 7:19 pm
- Name: Randy
- Vehicle Year: Other
- Vehicle: Other Vehicle
- DriveTrain: 4WD
That's why I want aluminum vs. steel.
-
Trail X - Founder
- Posts: 9925
- Joined: Mon Sep 07, 2009 10:22 pm
- Location: VA, Roanoke
- Name: James Downing
- Vehicle Year: 2005
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ Aftermarket Locker
- Rank: Expedition Guide
"Plus, for us here in the northeast, we won't have to worry about rusting issues."
So, this was an attempt at humor? 
So, this was an attempt at humor?
- bgwolfpack
- Veteran
- Posts: 1794
- Joined: Fri Sep 18, 2009 7:19 pm
- Name: Randy
- Vehicle Year: Other
- Vehicle: Other Vehicle
- DriveTrain: 4WD
I meant:
With an aluminum plate, the shipping cost and weight will be a benefit.
Plus, for us here in the northeast, we won't have to worry about rusting issues because otherwise it's a big problem here.
With an aluminum plate, the shipping cost and weight will be a benefit.
Plus, for us here in the northeast, we won't have to worry about rusting issues because otherwise it's a big problem here.
-
Trail X - Founder
- Posts: 9925
- Joined: Mon Sep 07, 2009 10:22 pm
- Location: VA, Roanoke
- Name: James Downing
- Vehicle Year: 2005
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ Aftermarket Locker
- Rank: Expedition Guide
JamesDowning wrote:I meant:
With an aluminum plate, the shipping cost and weight will be a benefit.
Plus, for us here in the northeast, we won't have to worry about rusting issues because otherwise it's a big problem here.
I figured out what you meant. Just my inflection was out of place.
I will be interested in the end cost of the aluminum over the steel, since you asked the question.
Anxious to see what NEILAGE INC. comes up with. Neat bunch of fabricators in this group.
- bgwolfpack
- Veteran
- Posts: 1794
- Joined: Fri Sep 18, 2009 7:19 pm
- Name: Randy
- Vehicle Year: Other
- Vehicle: Other Vehicle
- DriveTrain: 4WD
I'll be looking into this eventually, and I also think I'd rather have aluminum as well. But I might also look into making my own over the winter when I get some free time in my buddies shop.. if not I'll be hitting you up early spring before the wheelin' season starts back up again. 
Build Thread
Back to stock, had fun while it lasted...
Back to stock, had fun while it lasted...
- janesy86
- Veteran
- Posts: 1291
- Joined: Thu Sep 10, 2009 2:29 pm
- Location: MA, Salem
- Name: Nick Janes
- Vehicle Year: 2007
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ G80
- Rank: Offroad Rated
Thanks Guys and I will see what my price is on the aluminum. The only problem with the aluminum for the gas tank skid is we will have to use thicker material. The whole point of this is to save the gas tank in case of an impact. Thanks again Neil.
NEILAGEINC.com
- NeilageInc
- Member
- Posts: 84
- Joined: Thu Sep 10, 2009 12:08 am
- Location: CA, El Cajon
- Name: Neil Talmadge
- Vehicle Year: Other
- Vehicle: Other Vehicle
- DriveTrain: 4WD
i dont see any pics when i view this topic. i too would really like to see an aluminum or chromoly option because i too have to deal with a very serious concern for rust.
- Zero
- Veteran
- Posts: 1048
- Joined: Thu Sep 10, 2009 5:07 pm
- Location: Los Angeles, CA / Toronto, ON
- Name: Brendan
- Vehicle Year: 2005
- Vehicle: Chevrolet Trailblazer EXT
- DriveTrain: 4WD w/ G80
- Rank: Offroad Rated
The pics are in my thread discussing the mod.
-
The Roadie - Founder
- Posts: 5011
- Joined: Mon Sep 07, 2009 11:29 pm
- Location: CA, Vista, San Diego County
- Name: Bill Carton
- Vehicle Year: 2004
- Vehicle: GMC Envoy
- DriveTrain: 4WD w/ G80
- Rank: Expedition Guide
Sorry guys I have been swamped. I have not gotten a price on the aluminum yet. As for the chromoly, you only need cold rolled which is what I used for The Roadie. Also for the corrosion issue I will offer clear coating or I can get a price on clear powder coating. Thanks again Neil.
NEILAGEINC.com
- NeilageInc
- Member
- Posts: 84
- Joined: Thu Sep 10, 2009 12:08 am
- Location: CA, El Cajon
- Name: Neil Talmadge
- Vehicle Year: Other
- Vehicle: Other Vehicle
- DriveTrain: 4WD
thanx for the updates! ill be wathcing the thread for when you post an aluminum price. I have the ext model with the 6cyl engine, so weight is a big issue to me until i either change my gearing, or get a 5.3 put in
- Zero
- Veteran
- Posts: 1048
- Joined: Thu Sep 10, 2009 5:07 pm
- Location: Los Angeles, CA / Toronto, ON
- Name: Brendan
- Vehicle Year: 2005
- Vehicle: Chevrolet Trailblazer EXT
- DriveTrain: 4WD w/ G80
- Rank: Offroad Rated
20 posts
• Page 1 of 1