Okay Rock Sliders for $150 + shipping.
These will be made from 1.50" x .120 DOM tubing.
They can come in any length specified. And will have the right angle already fitted to give proper movement over the obstacle. Also they will come with the inner strengthening plates that will attach to the frame as well as some triangle gussets for more rigidity. You can PM me if you have any other questions and I will respond promptly. Thanks Neil at NEILAGE INC.
ROCK SLIDERS
Forum rules
All posts in this section pertain to our vendor:
36 posts
• Page 1 of 2 • 1, 2
NEILAGEINC.com
- NeilageInc
- Member
- Posts: 84
- Joined: Thu Sep 10, 2009 12:08 am
- Location: CA, El Cajon
- Name: Neil Talmadge
- Vehicle Year: Other
- Vehicle: Other Vehicle
- DriveTrain: 4WD
Do you have an address for pickup? IIRC you're in El Monte, right? I may take you up on this after the holidays.
My Build Thread | 2006 Trailblazer LS Desert Camping Edition **SOLD**
2013 Nissan Xterra S "ReXterra"
2013 Nissan Xterra S "ReXterra"
-
Philberto - Lifer
- Posts: 2046
- Joined: Fri Sep 11, 2009 5:30 pm
- Location: CA, Oxnard
- Name: Philip Cruz
- Vehicle Year: Other
- Vehicle: Other Vehicle
- DriveTrain: 4WD
- Rank: Offroad Rated
Neilage Inc. is located in El Cajon, CA. Which is in San Diego county. I will be happy to find out a shipping price if you would like. Thanks Neil.
NEILAGEINC.com
- NeilageInc
- Member
- Posts: 84
- Joined: Thu Sep 10, 2009 12:08 am
- Location: CA, El Cajon
- Name: Neil Talmadge
- Vehicle Year: Other
- Vehicle: Other Vehicle
- DriveTrain: 4WD
Or I can pick them up and deliver to Borrego whenever we meet up out there. Surely we'll have more than one time a year to get together. Or shuttle them up to Irvine or someplace if you ever get that far south. Mrs. Roadie's Civic gets great mileage.
-
The Roadie - Founder
- Posts: 5011
- Joined: Mon Sep 07, 2009 11:29 pm
- Location: CA, Vista, San Diego County
- Name: Bill Carton
- Vehicle Year: 2004
- Vehicle: GMC Envoy
- DriveTrain: 4WD w/ G80
- Rank: Expedition Guide
I can deliver as far as Bakersfield which is about $30 dollars for me to drive. So I' sure there is something we can get worked out. Thanks Roadie, I appreciate it.
NEILAGEINC.com
- NeilageInc
- Member
- Posts: 84
- Joined: Thu Sep 10, 2009 12:08 am
- Location: CA, El Cajon
- Name: Neil Talmadge
- Vehicle Year: Other
- Vehicle: Other Vehicle
- DriveTrain: 4WD
NeilageInc wrote:I can deliver as far as Bakersfield which is about $30 dollars for me to drive. So I' sure there is something we can get worked out. Thanks Roadie, I appreciate it.
Hell, if you can make it to Bakersfield, then it'll be no big deal to make it out here... it's actually a shorter drive than Bakersfield I think... I'm just on the coast up the 405 from you. We'll talk when I can get them though... I may just have you put them on down there if I can get out there... I'll make it a trip to take my girlfriend out to the SD zoo.
My Build Thread | 2006 Trailblazer LS Desert Camping Edition **SOLD**
2013 Nissan Xterra S "ReXterra"
2013 Nissan Xterra S "ReXterra"
-
Philberto - Lifer
- Posts: 2046
- Joined: Fri Sep 11, 2009 5:30 pm
- Location: CA, Oxnard
- Name: Philip Cruz
- Vehicle Year: Other
- Vehicle: Other Vehicle
- DriveTrain: 4WD
- Rank: Offroad Rated
NICE! What would shipping be to NJ, 08527?
I'd really like a set like JD's...
I'd really like a set like JD's...
Mario - Build Thread
-
Gordinho80 - Lifer
- Posts: 2787
- Joined: Tue Sep 08, 2009 9:27 am
- Location: NJ, Jackson
- Name: Mario Almeida
- Vehicle Year: Other
- Vehicle: Other Vehicle
- DriveTrain: 4WD
Gordinho80 wrote:NICE! What would shipping be to NJ, 08527?
I'd really like a set like JD's...
MEE TOO!!!! 06450!! Looking for a Christmas present to myself.
-
Dizzlenator - Off-Roader
- Posts: 156
- Joined: Wed Sep 09, 2009 6:22 pm
- Location: Meriden CT
- Vehicle Year: Other
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD
- Rank: Offroad Rated
If cheaper... we could arrange for a mass delivery for East Coasters... and we can then all meet up to distribute...
Mario - Build Thread
-
Gordinho80 - Lifer
- Posts: 2787
- Joined: Tue Sep 08, 2009 9:27 am
- Location: NJ, Jackson
- Name: Mario Almeida
- Vehicle Year: Other
- Vehicle: Other Vehicle
- DriveTrain: 4WD
Hmm... that could be a good idea!
Only White Lifted TB in Jerzey on 33's 
Pine Barrens Wheelin!
Build Thread http://forums.offroadtb.com/viewtopic.php?f=25&t=113
Pine Barrens Wheelin!Build Thread http://forums.offroadtb.com/viewtopic.php?f=25&t=113
-
foosh - Addict
- Posts: 715
- Joined: Fri Sep 11, 2009 9:01 pm
- Location: Red Bank Area
- Vehicle Year: 2004
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD
- Rank: Offroad Rated
orgy... it's all goodGordinho80 wrote:distribute...
What dimensions are you guys looking for or want? Remember, Neil will be able to really give you exactly what you're looking for
-
teebes - Founder
- Posts: 1052
- Joined: Thu Sep 03, 2009 1:05 am
- Location: CA, San Diego
- Name: Teebes
- Vehicle Year: 2002
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ Aftermarket Locker
- Rank: Expedition Rated
teebes wrote:orgy... it's all goodGordinho80 wrote:distribute...
What dimensions are you guys looking for or want? Remember, Neil will be able to really give you exactly what you're looking for
Seriously, custom built to order eliminates quite a few limitations. How about something to flow with the curvature of the rockers so we could get as close to the body as possible without cutting?
-
MrSmithsTB - Veteran
- Posts: 1756
- Joined: Thu Sep 10, 2009 2:28 pm
- Location: EHT, NJ
- Name: Bob
- Vehicle Year: 2006
- Vehicle: Other GMT360/370
- DriveTrain: AWD w/ G80
- Rank: Offroad Rated
-
Gordinho80 - Lifer
- Posts: 2787
- Joined: Tue Sep 08, 2009 9:27 am
- Location: NJ, Jackson
- Name: Mario Almeida
- Vehicle Year: Other
- Vehicle: Other Vehicle
- DriveTrain: 4WD
Guys... there's already someone offering that design here on the east coast. Granted he isn't a vendor here, but you may want to contact him before stealing his design.
-
Trail X - Founder
- Posts: 9925
- Joined: Mon Sep 07, 2009 10:22 pm
- Location: VA, Roanoke
- Name: James Downing
- Vehicle Year: 2005
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ Aftermarket Locker
- Rank: Expedition Guide
Not talking about stealing ideas here. Something "sort of" like JDs aren't exactly like JDs. Hell, his are "sort of" like a lot of other sliders. I'm talking about something not inverted, so as to minimize the chances of being drawn in to any rocks we would encounter, with the longer tube under the rocker and curved vertically at the ends to fit the contour. If it can't be done that way, it can't be done. But the only way to find out is to bring it up. Now, I'll be all about letting a local vendor design and build these, but the point of this thread is to discuss with a member/vendor what the options are by using him....
-
MrSmithsTB - Veteran
- Posts: 1756
- Joined: Thu Sep 10, 2009 2:28 pm
- Location: EHT, NJ
- Name: Bob
- Vehicle Year: 2006
- Vehicle: Other GMT360/370
- DriveTrain: AWD w/ G80
- Rank: Offroad Rated
I don't mean to discourage you guys from going with Neil. If he was around last year, I'd have looked into using him too.
My only concern is copying my guy's design exactly... I do realize that his asking price was a tad high though... and I certainly recommend trying out a site vendor!
Heck, once the Mrs finds a job around here, I'll be hitting Neil up for one of those nice gas tank skids!
BTW... Neil, do you offer powdercoating? I'm curious what you would charge, as my local guy seems a tad outrageous.
My only concern is copying my guy's design exactly... I do realize that his asking price was a tad high though... and I certainly recommend trying out a site vendor!
Heck, once the Mrs finds a job around here, I'll be hitting Neil up for one of those nice gas tank skids!
BTW... Neil, do you offer powdercoating? I'm curious what you would charge, as my local guy seems a tad outrageous.
-
Trail X - Founder
- Posts: 9925
- Joined: Mon Sep 07, 2009 10:22 pm
- Location: VA, Roanoke
- Name: James Downing
- Vehicle Year: 2005
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ Aftermarket Locker
- Rank: Expedition Guide
Depending on how much powedercoating your gonna be doing, you could buy the over and start doing it al yourself! I'm kinda thinking about opening up a small powercoating shop for wheels tires etc...
Only White Lifted TB in Jerzey on 33's
Pine Barrens Wheelin!
Build Thread http://forums.offroadtb.com/viewtopic.php?f=25&t=113
Pine Barrens Wheelin!Build Thread http://forums.offroadtb.com/viewtopic.php?f=25&t=113
-
foosh - Addict
- Posts: 715
- Joined: Fri Sep 11, 2009 9:01 pm
- Location: Red Bank Area
- Vehicle Year: 2004
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD
- Rank: Offroad Rated
Tom, do you currently have the means to powdercoat? I have a couple of things I'd like coated...
Mario - Build Thread
-
Gordinho80 - Lifer
- Posts: 2787
- Joined: Tue Sep 08, 2009 9:27 am
- Location: NJ, Jackson
- Name: Mario Almeida
- Vehicle Year: Other
- Vehicle: Other Vehicle
- DriveTrain: 4WD
foosh wrote:Depending on how much powedercoating your gonna be doing, you could buy the over and start doing it al yourself! I'm kinda thinking about opening up a small powercoating shop for wheels tires etc...
I know it was just a mistake, but thinking of some punk kid coming in and wanting you to powdercoat his tires made me laugh.
they've always worked for me.
-
HARDTRAILZ - Moderator
- Posts: 6342
- Joined: Sat Sep 12, 2009 1:49 am
- Location: IN, Batesville
- Name: Kyle
- Vehicle Year: 2006
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ Aftermarket Locker
- Rank: Extreme Offroader
my armor situation is far less then impressive. once i get a bit more cash, ill be beffin things up a bit. after a lot of thought i will probably go with the skid plates before the rock sliders
- Zero
- Veteran
- Posts: 1048
- Joined: Thu Sep 10, 2009 5:07 pm
- Location: Los Angeles, CA / Toronto, ON
- Name: Brendan
- Vehicle Year: 2005
- Vehicle: Chevrolet Trailblazer EXT
- DriveTrain: 4WD w/ G80
- Rank: Offroad Rated
36 posts
• Page 1 of 2 • 1, 2