Offroad Trailblazers and Envoys

MDB Quick-Disconnect Swaybar Links...

Products offered by our vendor: BartonMD

Image

Moderator: bartonmd

Forum rules
All posts in this section pertain to our vendor:
Image

by janesy86 » Mon Jul 25, 2011 4:15 pm

Look what just came in from MDB fab! A set of his quick disco's for the front to test out! Super easy to install and took the TB around the lock and couldn't hear much/ if any clunking and also super easy to disconnect/ put back on!

Image

Image

Image
Build Thread
Back to stock, had fun while it lasted...
janesy86
Veteran
 
Posts: 1291
Joined: Thu Sep 10, 2009 2:29 pm
Location: MA, Salem
Name: Nick Janes
Vehicle Year: 2007
Vehicle: Chevrolet TrailBlazer
DriveTrain: 4WD w/ G80
Rank: Offroad Rated

by bartonmd » Mon Jul 25, 2011 4:30 pm

Awesome! I was going to send you a PM tonight, and see if they showed up today!

Mike
bartonmd
Moderator
 
Posts: 4469
Joined: Wed Sep 09, 2009 9:35 am
Location: IN, Indianapolis
Name: Mike
Vehicle Year: 2007
Vehicle: Chevrolet TrailBlazer
DriveTrain: 4WD w/ G80
Rank: Offroad Rated

by Trail X » Mon Jul 25, 2011 4:54 pm

Mike, are you doing rears too?
8-) Build Thread | ExPo Build | YouTube Videos
Not all who wander are lost. -Tolkien
User avatar
Trail X
Founder
 
Posts: 9925
Joined: Mon Sep 07, 2009 10:22 pm
Location: VA, Roanoke
Name: James Downing
Vehicle Year: 2005
Vehicle: Chevrolet TrailBlazer
DriveTrain: 4WD w/ Aftermarket Locker
Rank: Expedition Guide

by MrSmithsTB » Mon Jul 25, 2011 4:55 pm

JamesDowning wrote:Mike, are you doing rears too?


:Iagree: I am no longer running a front bar, but my SMAXX rears are pretty must toast.
back in the saddle
TB BUILD
User avatar
MrSmithsTB
Veteran
 
Posts: 1756
Joined: Thu Sep 10, 2009 2:28 pm
Location: EHT, NJ
Name: Bob
Vehicle Year: 2006
Vehicle: Other GMT360/370
DriveTrain: AWD w/ G80
Rank: Offroad Rated

by bartonmd » Mon Jul 25, 2011 4:56 pm

JamesDowning wrote:Mike, are you doing rears too?


Yeah, I will be... I just wanted to get these fronts done and out to Nick... I haven't spent a lot of time looking at the rears just yet...

Thanks,
Mike
bartonmd
Moderator
 
Posts: 4469
Joined: Wed Sep 09, 2009 9:35 am
Location: IN, Indianapolis
Name: Mike
Vehicle Year: 2007
Vehicle: Chevrolet TrailBlazer
DriveTrain: 4WD w/ G80
Rank: Offroad Rated

by janesy86 » Mon Jul 25, 2011 5:08 pm

I think I'm going to just remove the rear sway bar all together, since it's been nothing but an anchor for me, for the most part. And with just the front connected on road it drives nice, but since I'd like to keep one sway bar for the road it makes more sense for me to have the front there, and just disco when off road.
Build Thread
Back to stock, had fun while it lasted...
janesy86
Veteran
 
Posts: 1291
Joined: Thu Sep 10, 2009 2:29 pm
Location: MA, Salem
Name: Nick Janes
Vehicle Year: 2007
Vehicle: Chevrolet TrailBlazer
DriveTrain: 4WD w/ G80
Rank: Offroad Rated

by Gordinho80 » Mon Jul 25, 2011 5:11 pm

I've often wondered what would be better, front or rear swaybar. My front has been disconnected for some time now, and my rear links are SHOT. I'm wondering if running the MDB links in the front and removing the rear would be sufficient. I plan on having a little more weight in back with the bumper now, not sure how that will effect things with the Z71 springs and BDS spacers.
Mario - Build Thread
User avatar
Gordinho80
Lifer
 
Posts: 2787
Joined: Tue Sep 08, 2009 9:27 am
Location: NJ, Jackson
Name: Mario Almeida
Vehicle Year: Other
Vehicle: Other Vehicle
DriveTrain: 4WD

by The Roadie » Mon Jul 25, 2011 7:34 pm

MrSmithsTB wrote:... my SMAXX rears are pretty must toast.
Got pics or a description of the damage? The bushings or something solid? I'm worried about mine because of the high friction between the bushings and the spherical sockets they're in. Mike's got the sturdier design.
User avatar
The Roadie
Founder
 
Posts: 5011
Joined: Mon Sep 07, 2009 11:29 pm
Location: CA, Vista, San Diego County
Name: Bill Carton
Vehicle Year: 2004
Vehicle: GMC Envoy
DriveTrain: 4WD w/ G80
Rank: Expedition Guide

by NC_IslandRunner » Mon Jul 25, 2011 7:49 pm

I'm adding stuff to my wish list faster than I'm checking them off :wallbash:
IF THE FISH STOP BITING... HUNT FOR SHELLS!!!
User avatar
NC_IslandRunner
Moderator
 
Posts: 3021
Joined: Fri Dec 03, 2010 4:49 pm
Location: NC, Sanford
Name: Rory
Vehicle Year: 2004
Vehicle: Chevrolet TrailBlazer
DriveTrain: 4WD w/ G80
Rank: Offroad Rated

by snowmirage » Mon Jul 25, 2011 10:18 pm

NC_IslandRunner wrote:I'm adding stuff to my wish list faster than I'm checking them off :wallbash:


:roll: You and me both.... :lol:
User avatar
snowmirage
Off-Roader
 
Posts: 232
Joined: Sun Jun 26, 2011 12:13 pm
Location: MD, Baltimore
Name: Brandon
Vehicle Year: 2003
Vehicle: Chevrolet TrailBlazer
DriveTrain: 4WD w/ G80

by The Roadie » Mon Jul 25, 2011 10:20 pm

I've been told my build thread should be suppressed from view a month or two before Christmas to reduce temptation.
User avatar
The Roadie
Founder
 
Posts: 5011
Joined: Mon Sep 07, 2009 11:29 pm
Location: CA, Vista, San Diego County
Name: Bill Carton
Vehicle Year: 2004
Vehicle: GMC Envoy
DriveTrain: 4WD w/ G80
Rank: Expedition Guide

by djthumper » Mon Jul 25, 2011 10:31 pm

I think my wish list is check 1 add 3.
User avatar
djthumper
Moderator
 
Posts: 2702
Joined: Wed Mar 24, 2010 6:04 pm
Location: NV, Las Vegas
Name: Larry
Vehicle Year: 2006
Vehicle: Chevrolet TrailBlazer
DriveTrain: 4WD
Rank: Offroad Rated

by MrSmithsTB » Tue Jul 26, 2011 12:05 am

The Roadie wrote:
MrSmithsTB wrote:... my SMAXX rears are pretty must toast.
Got pics or a description of the damage? The bushings or something solid? I'm worried about mine because of the high friction between the bushings and the spherical sockets they're in. Mike's got the sturdier design.


Surprisingly, the sockets and bushings are ok. The bolts running through are bent to shit and I am amazed they haven't snapped completely. For the time being, I'll probably just replace the bolts, but I am really looking for some way to eliminate that weak point.


Interesting theory about the front and rear bars. I would rather have the front connected if pulling the rear instead isn't going to have a negative effect. One less component hanging below the frame.
back in the saddle
TB BUILD
User avatar
MrSmithsTB
Veteran
 
Posts: 1756
Joined: Thu Sep 10, 2009 2:28 pm
Location: EHT, NJ
Name: Bob
Vehicle Year: 2006
Vehicle: Other GMT360/370
DriveTrain: AWD w/ G80
Rank: Offroad Rated

by janesy86 » Fri Jul 29, 2011 12:55 pm

Since I've been driving with these for the last 4 days or so, and put on about 400 miles, I figured I'd give a quick update...

No clunking at all with these, possibly a slight noise but nothing I can hear over the MT's. I'm also really liking having only the front connected, seems to be more stable on road than with just the front disco'd which is nice since I do a lot of daily driving.

Also have taken them off a couple times to see how easy they are to remove and put back on and they are super quick to remove! Diggin' them for sure so far!
Build Thread
Back to stock, had fun while it lasted...
janesy86
Veteran
 
Posts: 1291
Joined: Thu Sep 10, 2009 2:29 pm
Location: MA, Salem
Name: Nick Janes
Vehicle Year: 2007
Vehicle: Chevrolet TrailBlazer
DriveTrain: 4WD w/ G80
Rank: Offroad Rated

by TangoBravo » Fri Jul 29, 2011 1:25 pm

I have my rear perm disco'ed so the quick disco's for the front is awsome. They look great
Scouts Out, Carbon County Search and Rescue/Carbon County volunteer firefighter.

Ams oil products bumper to bumper, Treadwright Guard Dogs, 3 inch suspension lift, 3 inch body lift 1.5" spacers, swaybar trashcan mod, quad headlight mod
User avatar
TangoBravo
Addict
 
Posts: 652
Joined: Thu Aug 19, 2010 8:57 pm
Location: Hanna Wy
Name: Robert
Vehicle Year: 2004
Vehicle: Chevrolet TrailBlazer
DriveTrain: 4WD
Rank: Trail Ready

by bartonmd » Fri Jul 29, 2011 3:16 pm

janesy86 wrote:Since I've been driving with these for the last 4 days or so, and put on about 400 miles, I figured I'd give a quick update...

No clunking at all with these, possibly a slight noise but nothing I can hear over the MT's. I'm also really liking having only the front connected, seems to be more stable on road than with just the front disco'd which is nice since I do a lot of daily driving.

Also have taken them off a couple times to see how easy they are to remove and put back on and they are super quick to remove! Diggin' them for sure so far!


Thanks for the update, Nick!

Yeah, there will be a little bit of noise (that it's hard to hear over M/T tires) because the heim to pin is a slip fit, so it's not going to be 110% tight, or it wouldn't slip on and off... I didn't find it obtrusive, though...

Mike
bartonmd
Moderator
 
Posts: 4469
Joined: Wed Sep 09, 2009 9:35 am
Location: IN, Indianapolis
Name: Mike
Vehicle Year: 2007
Vehicle: Chevrolet TrailBlazer
DriveTrain: 4WD w/ G80
Rank: Offroad Rated

by janesy86 » Fri Jul 29, 2011 4:31 pm

bartonmd wrote:Yeah, there will be a little bit of noise (that it's hard to hear over M/T tires) because the heim to pin is a slip fit, so it's not going to be 110% tight, or it wouldn't slip on and off... I didn't find it obtrusive, though...

Mike


Exactly... really can't hear anything, just stating that there may be slight noise, to possibly be expected, but can't hardly hear it anyway of the roar of M/T's. Just another awesome product for sure!
Build Thread
Back to stock, had fun while it lasted...
janesy86
Veteran
 
Posts: 1291
Joined: Thu Sep 10, 2009 2:29 pm
Location: MA, Salem
Name: Nick Janes
Vehicle Year: 2007
Vehicle: Chevrolet TrailBlazer
DriveTrain: 4WD w/ G80
Rank: Offroad Rated

by bartonmd » Fri Jul 29, 2011 4:36 pm

janesy86 wrote:
bartonmd wrote:Yeah, there will be a little bit of noise (that it's hard to hear over M/T tires) because the heim to pin is a slip fit, so it's not going to be 110% tight, or it wouldn't slip on and off... I didn't find it obtrusive, though...

Mike


Exactly... really can't hear anything, just stating that there may be slight noise, to possibly be expected, but can't hardly hear it anyway of the roar of M/T's. Just another awesome product for sure!


Thanks, Nick!
bartonmd
Moderator
 
Posts: 4469
Joined: Wed Sep 09, 2009 9:35 am
Location: IN, Indianapolis
Name: Mike
Vehicle Year: 2007
Vehicle: Chevrolet TrailBlazer
DriveTrain: 4WD w/ G80
Rank: Offroad Rated

by MrSmithsTB » Sat Jul 30, 2011 5:41 pm

Well, one of my rear end links officially shit the bed last night taking a turn. Broke the bolt of right at the bottom bushing. So it looks like I will be pitching the rear bar and installing the front with smaxx links for now. These quick discos have moved up on the list.
back in the saddle
TB BUILD
User avatar
MrSmithsTB
Veteran
 
Posts: 1756
Joined: Thu Sep 10, 2009 2:28 pm
Location: EHT, NJ
Name: Bob
Vehicle Year: 2006
Vehicle: Other GMT360/370
DriveTrain: AWD w/ G80
Rank: Offroad Rated

by Flying Monkey » Sun Sep 11, 2011 11:51 pm

How are we looking on these? Would love a set of them so I can disconnect my sways.
User avatar
Flying Monkey
Addict
 
Posts: 597
Joined: Wed Apr 13, 2011 3:09 pm
Location: GA, Ringgold
Name: Chris
Vehicle Year: 2004
Vehicle: Chevrolet TrailBlazer
DriveTrain: 4WD
Rank: Trail Ready

PreviousNext

Return to MDB Fabrication