Aluminum and Steel Oil Pan Skid Plates...
Moderator: bartonmd
Forum rules
All posts in this section pertain to our vendor:
Do any modifications need to be made to install these plates?
Once lifted 03 Trailblazer on 35's, gave it up to travel the USA with my family.
-
mikekey - Lifer
- Posts: 2585
- Joined: Sat Jan 15, 2011 4:08 am
- Location: North America
- Name: Mike
- Vehicle Year: 2003
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ G80
- Rank: Expedition Rated
mikekey wrote:Do any modifications need to be made to install these plates?
As far as I know you dont have to make any at all. I ordered mine but have to wait till I am back from the desert to pick them up and install them.
I REFUSE TO TIP TOE THROUGH LIFE TO ARRIVE SAFELY AT DEATH!!!
- mikepeters1983
- Trail-Blazer
- Posts: 473
- Joined: Mon Mar 29, 2010 8:49 pm
- Location: SC, Greenville
- Name: Mike
- Vehicle Year: 2004
- Vehicle: GMC Envoy XUV
- DriveTrain: 2WD w/ G80
- Rank: Trail Ready
mikekey wrote:Do any modifications need to be made to install these plates?
Unless you want bolt head protectors, they are bolt in. Mike will weld the protectors on for you for a small fee.
11 Silverado LTZ - 6.2L/6l80, 2/3 drop, self tuned
85 Hilux - 3RZ, dual cases, caged, 40s, chromo everything
02 TrailBlazer LTZ - 35s, lockers, balls - Gone but not forgotten - Build
85 Hilux - 3RZ, dual cases, caged, 40s, chromo everything
02 TrailBlazer LTZ - 35s, lockers, balls - Gone but not forgotten - Build
-
fishsticks - Moderator
- Posts: 4356
- Joined: Thu Apr 01, 2010 11:30 pm
- Location: WA, Vancouver
- Name: Donny
- Vehicle Year: Other
- Vehicle: Other Vehicle
- DriveTrain: 4WD w/ Aftermarket Locker
- Rank: Extreme Offroader
Thanks, guys!
No modifications have to be made to install anything I make...
Thanks,
Mike
No modifications have to be made to install anything I make...
Thanks,
Mike
- bartonmd
- Moderator
- Posts: 4469
- Joined: Wed Sep 09, 2009 9:35 am
- Location: IN, Indianapolis
- Name: Mike
- Vehicle Year: 2007
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ G80
- Rank: Offroad Rated
bartonmd wrote:Thanks, guys!
No modifications have to be made to install anything I make...
I REFUSE TO TIP TOE THROUGH LIFE TO ARRIVE SAFELY AT DEATH!!!
- mikepeters1983
- Trail-Blazer
- Posts: 473
- Joined: Mon Mar 29, 2010 8:49 pm
- Location: SC, Greenville
- Name: Mike
- Vehicle Year: 2004
- Vehicle: GMC Envoy XUV
- DriveTrain: 2WD w/ G80
- Rank: Trail Ready
Actually, I take that back... You'll need to cut some of the front part of the inner fender plastic for a bumper... Though you need to do that if you're rolling with just the stock impact bar, anyway...
- bartonmd
- Moderator
- Posts: 4469
- Joined: Wed Sep 09, 2009 9:35 am
- Location: IN, Indianapolis
- Name: Mike
- Vehicle Year: 2007
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ G80
- Rank: Offroad Rated
Since I had it off today, figured I'd let you see her again. Shes doing great!
Current Count of Transmission Rebuilds: 5.5
***The more you know, the less you need.***
USMC '07-'12
Dirty Bacon's Build
-
DirtyBacon04 - Moderator
- Posts: 3048
- Joined: Fri Aug 05, 2011 4:59 am
- Location: AK, Fairbanks
- Name: Michael
- Vehicle Year: 2004
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ Aftermarket Locker
- Rank: Expedition Rated
Where is the bacon?
-
djthumper - Moderator
- Posts: 2702
- Joined: Wed Mar 24, 2010 6:04 pm
- Location: NV, Las Vegas
- Name: Larry
- Vehicle Year: 2006
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD
- Rank: Offroad Rated
In my belly
Current Count of Transmission Rebuilds: 5.5
***The more you know, the less you need.***
USMC '07-'12
Dirty Bacon's Build
-
DirtyBacon04 - Moderator
- Posts: 3048
- Joined: Fri Aug 05, 2011 4:59 am
- Location: AK, Fairbanks
- Name: Michael
- Vehicle Year: 2004
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ Aftermarket Locker
- Rank: Expedition Rated
I imagine you could throw that skid on a camp fire and cook some bacon on it though 
Last edited by navigator on Thu Mar 01, 2012 9:27 pm, edited 1 time in total.
"Please consider a search before posting. Folks on this site PIONEERED functional offroad use of these trucks."
The answer to many common lift questions can be found here
My Build Thread
The answer to many common lift questions can be found here
My Build Thread
-
navigator - Moderator
- Posts: 4651
- Joined: Wed Mar 09, 2011 10:16 am
- Location: NC, Winnabow
- Name: Chris
- Vehicle Year: 2006
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD
- Rank: Trail Ready
- bartonmd
- Moderator
- Posts: 4469
- Joined: Wed Sep 09, 2009 9:35 am
- Location: IN, Indianapolis
- Name: Mike
- Vehicle Year: 2007
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ G80
- Rank: Offroad Rated
One of only two Trailblazer/Envoy oil pan skid plates to ever run the Rubicon Trail. Historic, and may never be repeated without a SAS truck.
-
The Roadie - Founder
- Posts: 5011
- Joined: Mon Sep 07, 2009 11:29 pm
- Location: CA, Vista, San Diego County
- Name: Bill Carton
- Vehicle Year: 2004
- Vehicle: GMC Envoy
- DriveTrain: 4WD w/ G80
- Rank: Expedition Guide
Wish I was closer to play on the rubicon
they've always worked for me.
-
HARDTRAILZ - Moderator
- Posts: 6342
- Joined: Sat Sep 12, 2009 1:49 am
- Location: IN, Batesville
- Name: Kyle
- Vehicle Year: 2006
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ Aftermarket Locker
- Rank: Extreme Offroader
Roadie, did you have the front receiver hitch on your TB then?
"Please consider a search before posting. Folks on this site PIONEERED functional offroad use of these trucks."
The answer to many common lift questions can be found here
My Build Thread
The answer to many common lift questions can be found here
My Build Thread
-
navigator - Moderator
- Posts: 4651
- Joined: Wed Mar 09, 2011 10:16 am
- Location: NC, Winnabow
- Name: Chris
- Vehicle Year: 2006
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD
- Rank: Trail Ready
navigator wrote:Roadie, did you have the front receiver hitch on your TB then?
No, that was after I traded him the hitch for the skids...
Mike
- bartonmd
- Moderator
- Posts: 4469
- Joined: Wed Sep 09, 2009 9:35 am
- Location: IN, Indianapolis
- Name: Mike
- Vehicle Year: 2007
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ G80
- Rank: Offroad Rated
dang!
"Please consider a search before posting. Folks on this site PIONEERED functional offroad use of these trucks."
The answer to many common lift questions can be found here
My Build Thread
The answer to many common lift questions can be found here
My Build Thread
-
navigator - Moderator
- Posts: 4651
- Joined: Wed Mar 09, 2011 10:16 am
- Location: NC, Winnabow
- Name: Chris
- Vehicle Year: 2006
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD
- Rank: Trail Ready
God no. That was an expensive, but short-lived experiment before I had my bumper made. Everything I did in the first 3-4 years seemed to be an expensive, but short-lived experiment. But every item was well-loved and well-used and got me some functionality I needed for learning and growing experience. If I jumped straight from stock to the current Roadiemobile with currently available mods, I wouldn't have been able to drive it safely on the trails I can walk through now.
I mean, just LOOK at this insane noob, about an hour before he got into the most EPIC mud stuck: What was he (I) THINKING!?!?!??!?!?
I mean, just LOOK at this insane noob, about an hour before he got into the most EPIC mud stuck: What was he (I) THINKING!?!?!??!?!?
-
The Roadie - Founder
- Posts: 5011
- Joined: Mon Sep 07, 2009 11:29 pm
- Location: CA, Vista, San Diego County
- Name: Bill Carton
- Vehicle Year: 2004
- Vehicle: GMC Envoy
- DriveTrain: 4WD w/ G80
- Rank: Expedition Guide
LOL
"Please consider a search before posting. Folks on this site PIONEERED functional offroad use of these trucks."
The answer to many common lift questions can be found here
My Build Thread
The answer to many common lift questions can be found here
My Build Thread
-
navigator - Moderator
- Posts: 4651
- Joined: Wed Mar 09, 2011 10:16 am
- Location: NC, Winnabow
- Name: Chris
- Vehicle Year: 2006
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD
- Rank: Trail Ready
I most defiantly will be getting one soon to add to the build.
-
Ole Blue - Off-Roader
- Posts: 191
- Joined: Tue Jul 09, 2013 3:34 pm
- Location: Durham, NC
- Name: Cedd
- Vehicle Year: 2002
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD
The Roadie wrote:God no. That was an expensive, but short-lived experiment before I had my bumper made. Everything I did in the first 3-4 years seemed to be an expensive, but short-lived experiment. But every item was well-loved and well-used and got me some functionality I needed for learning and growing experience. If I jumped straight from stock to the current Roadiemobile with currently available mods, I wouldn't have been able to drive it safely on the trails I can walk through now.
I mean, just LOOK at this insane noob, about an hour before he got into the most EPIC mud stuck: What was he (I) THINKING!?!?!??!?!?
awwww those running boards are cute
- jonbo2002
- Addict
- Posts: 509
- Joined: Fri Mar 29, 2013 8:22 am
- Location: MI, Springport
- Name: Jon
- Vehicle Year: 2002
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ G80