Offroad Trailblazers and Envoys

3" BODY LIFTS FOR SALE!

Products offered by our vendor: high-voltage

by markmc » Sat Sep 29, 2012 2:23 am

navigator wrote:is the body lift for the EXT the same as the SWB?


Yes, The kit will fit both SWB and EXT.
Only dif is in the V8 to I6 radiator drop brackets.

The V8 has a slightly taller radiator that requires a little modding of the drop brackets.
A hack saw, couple 1/4x20 x1" bolts & nuts, drill and 1/4" bit will take care of the dif..
markmc
Off-Road Vendor
 
Posts: 234
Joined: Fri Sep 11, 2009 3:49 pm
Location: St Augustine FL
Name: Mark
Vehicle Year: 2007
Vehicle: Chevrolet TrailBlazer
DriveTrain: 2WD
Rank: Mall Rated

by navigator » Sat Sep 29, 2012 7:31 am

good info, thanks Mark.
"Please consider a search before posting. Folks on this site PIONEERED functional offroad use of these trucks."
The answer to many common lift questions can be found
here
My Build Thread
User avatar
navigator
Moderator
 
Posts: 4651
Joined: Wed Mar 09, 2011 10:16 am
Location: NC, Winnabow
Name: Chris
Vehicle Year: 2006
Vehicle: Chevrolet TrailBlazer
DriveTrain: 4WD
Rank: Trail Ready

by 06MidnightBlue » Sat Sep 29, 2012 9:57 am

CrimsonxRebel wrote:i have the rough country leveling kit and all it is is a 2.5 inch spacer in the front and a 1.5 inch spacer in the back would i have to take that off to get this kit put on?


It's actually a 2 inch front spacer and a .75 inch rear spacer.
User avatar
06MidnightBlue
Addict
 
Posts: 597
Joined: Tue Jul 12, 2011 4:14 am
Location: CA, Sacramento
Name: Jeff
Vehicle Year: 2006
Vehicle: Chevrolet TrailBlazer
DriveTrain: 4WD

by CrimsonxRebel » Sat Sep 29, 2012 1:06 pm

06MidnightBlue wrote:
CrimsonxRebel wrote:i have the rough country leveling kit and all it is is a 2.5 inch spacer in the front and a 1.5 inch spacer in the back would i have to take that off to get this kit put on?


It's actually a 2 inch front spacer and a .75 inch rear spacer.


Yeah I couldn't remember what they had but I ended up just putting the front on and not the back cuz it was level after the front
CrimsonxRebel
Cruiser
 
Posts: 23
Joined: Tue Sep 25, 2012 11:39 pm
Location: Osceola, Arkansas
Name: Johnathon Boatman
Vehicle Year: 2006
Vehicle: GMC Envoy XL
DriveTrain: 4WD

by The Roadie » Sat Sep 29, 2012 1:16 pm

Raising the rear is functionally useful (to me at least) because then if you get a rock jammed under your frame rail it gets LOOSER as you travel forward.

Offroading for most of us is about functionality, not appearance.
User avatar
The Roadie
Founder
 
Posts: 5011
Joined: Mon Sep 07, 2009 11:29 pm
Location: CA, Vista, San Diego County
Name: Bill Carton
Vehicle Year: 2004
Vehicle: GMC Envoy
DriveTrain: 4WD w/ G80
Rank: Expedition Guide

by Mgebhard » Sun Dec 20, 2020 3:10 am

Long outdated post I see, is there anywhere still making a 3" body?? Recently bought an 03, it has the 3/2.5 level kit sitting on 265/75/16s. ID like to go to a 33 without trimming a ton so my best guess would be a body lift? If theres other ways im all ears!! Thanks in advance
Mgebhard
Newbie
 
Posts: 1
Joined: Sun Dec 20, 2020 3:04 am
Name: Mike
Vehicle Year: 2003
Vehicle: Chevrolet TrailBlazer
DriveTrain: 4WD w/ G80

by HARDTRAILZ » Sun Dec 20, 2020 8:25 am

Two inch Zone is only complete kit.

Couple were selling a 3 inch version that was basically them just ordering blockd n bolts n extension then selling to you. Bunch of bumper trimming but not actual relocation brackets. You could easily create your own if you go that route.
I hate to advocate weird chemicals, alcohol, violence or insanity to anyone...but
they've always worked for me.
User avatar
HARDTRAILZ
Moderator
 
Posts: 6342
Joined: Sat Sep 12, 2009 1:49 am
Location: IN, Batesville
Name: Kyle
Vehicle Year: 2006
Vehicle: Chevrolet TrailBlazer
DriveTrain: 4WD w/ Aftermarket Locker
Rank: Extreme Offroader

by QPat19 » Tue Jan 12, 2021 12:18 am

Love to buy one!!
QPat19
Newbie
 
Posts: 1
Joined: Mon Jan 11, 2021 2:21 am
Name: Quinn
Vehicle Year: 2003
Vehicle: Chevrolet TrailBlazer
DriveTrain: 4WD w/ Limited Slip

Previous

Return to High Voltage Stuff

cron