Can i get away with using stock drive shafts into a dana 60 and gm 14 bolt?
Thanks dudes.
SAS question, because we need more SAS.
6 posts
• Page 1 of 1
- BrandonB
- Newbie
- Posts: 2
- Joined: Fri Jul 15, 2016 12:24 pm
- Name: brandon
- Vehicle Year: 2002
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD
If you find the appropriate u-joints I suppose you could.
But the length will be a problem after you figure out how to get them to mate to the axles. You'll have to have them lengthened and balanced anyways, might as well have the appropriate yolks put in place so you don't have such small caps on one end and larger on the other so to speak.
But the length will be a problem after you figure out how to get them to mate to the axles. You'll have to have them lengthened and balanced anyways, might as well have the appropriate yolks put in place so you don't have such small caps on one end and larger on the other so to speak.
- Diacom
- Addict
- Posts: 881
- Joined: Fri Jul 23, 2010 9:08 pm
- Location: NV, Yerington
- Name: Noel
- Vehicle Year: 2003
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ Aftermarket Locker
Not in stock form and driveshafts are pretty cheap in the whole equation of a SAS.
they've always worked for me.
-
HARDTRAILZ - Moderator
- Posts: 6342
- Joined: Sat Sep 12, 2009 1:49 am
- Location: IN, Batesville
- Name: Kyle
- Vehicle Year: 2006
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ Aftermarket Locker
- Rank: Extreme Offroader
- Shrutiii
- Newbie
- Posts: 1
- Joined: Wed Jan 01, 2020 6:44 am
- Location: Delhi
- Name: Shruti shelar
- Vehicle Year: 2006
- Vehicle: Other Vehicle
- DriveTrain: 2WD
It's technically possible. But Very unlikely. The length and yoke are likely different. The CV style of the front shaft is very limiting as well.
All in all, it would be crazy to try to design around a driveshaft. Much better things to worry about.
All in all, it would be crazy to try to design around a driveshaft. Much better things to worry about.
It's not how fast you go. It's how quick you get there. Lifted TBSS Build
-
ErikSS - Lifer
- Posts: 2044
- Joined: Fri Apr 26, 2013 5:23 pm
- Location: IL, Flossmoor
- Name: Erik
- Vehicle Year: 2008
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ Limited Slip
- Rank: Offroad Rated
Holy 2017
they've always worked for me.
-
HARDTRAILZ - Moderator
- Posts: 6342
- Joined: Sat Sep 12, 2009 1:49 am
- Location: IN, Batesville
- Name: Kyle
- Vehicle Year: 2006
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ Aftermarket Locker
- Rank: Extreme Offroader
6 posts
• Page 1 of 1