Offroad Trailblazers and Envoys

Any issues with removing front diff?

G80, GU6, GT4, GT5, WTF? This section is for gearing and driveline stuff.

by Blazentpi » Thu Jan 02, 2020 6:31 pm

Sorry if this is covered somewhere but I haven’t had much luck in my searches. Planning on replacing the seized 5.3 in my new to me 2003 ext project and since the game plan down the road is to do a straight axle swap would there be any adverse effects besides not having 4wd by leaving the front diff, front drive line and front cv’s out so I’m not having to remove them again later when the axle swap happens? I know some hub bearings don’t have much strength when the cv’s are removed and not sure if trailblazers are the same way. Thanks
Blazentpi
Newbie
 
Posts: 8
Joined: Thu Jan 02, 2020 3:15 pm
Name: Jay
Vehicle Year: 2003
Vehicle: Chevrolet Trailblazer EXT
DriveTrain: 4WD w/ G80

by Diacom » Thu Jan 02, 2020 10:33 pm

I ran an 02 TB w/o stub shafts in the wheel bearings. It was fine. Though I was told by the mechanics at the dealer ship I worked at that it would ruin the hubs.

I then sold it after driving it around for about a year as is and never heard from the guy that bought it again. So I really can't say one way or the other for sure, just from that experience.
Diacom
Addict
 
Posts: 882
Joined: Fri Jul 23, 2010 9:08 pm
Location: NV, Yerington
Name: Noel
Vehicle Year: 2003
Vehicle: Chevrolet TrailBlazer
DriveTrain: 4WD w/ Aftermarket Locker

by DirtyBacon04 » Sat Jan 04, 2020 7:48 pm

Trailblazer front hubs do not rely on CV/axle nuts for integrity. Even the RWD models use the same front hubs and do not have anything through the hole to hold the hub together. Personally, I've removed my front CVs for months at a time with no issues. Quality hubs makes a difference. If you don't mind replacing hubs annually, then sure, go with the cheap ebay stuff. I like to spring for ACDelco. My factory hubs lasted ~150k miles, and I preemptively replaced them a few years ago before they ever started to make noise.
Trans-Continental Trailblazer - 5th Award
Current Count of Transmission Rebuilds: 5.5
***The more you know, the less you need.***
USMC '07-'12
Dirty Bacon's Build
User avatar
DirtyBacon04
Moderator
 
Posts: 3048
Joined: Fri Aug 05, 2011 4:59 am
Location: AK, Fairbanks
Name: Michael
Vehicle Year: 2004
Vehicle: Chevrolet TrailBlazer
DriveTrain: 4WD w/ Aftermarket Locker
Rank: Expedition Rated

by ErikSS » Sun Jan 05, 2020 12:33 am

As long as your 4x4, not full time AWD, you'll be fine.
It's not how fast you go. It's how quick you get there. Lifted TBSS Build
User avatar
ErikSS
Lifer
 
Posts: 2044
Joined: Fri Apr 26, 2013 5:23 pm
Location: IL, Flossmoor
Name: Erik
Vehicle Year: 2008
Vehicle: Chevrolet TrailBlazer
DriveTrain: 4WD w/ Limited Slip
Rank: Offroad Rated

by Blazentpi » Mon Jan 06, 2020 11:30 am

Awesome thanks everyone.
Blazentpi
Newbie
 
Posts: 8
Joined: Thu Jan 02, 2020 3:15 pm
Name: Jay
Vehicle Year: 2003
Vehicle: Chevrolet Trailblazer EXT
DriveTrain: 4WD w/ G80

by HARDTRAILZ » Mon Jan 13, 2020 9:11 am

For past few months I have been sans front CV and driveshaft. No issues.
I hate to advocate weird chemicals, alcohol, violence or insanity to anyone...but
they've always worked for me.
User avatar
HARDTRAILZ
Moderator
 
Posts: 6342
Joined: Sat Sep 12, 2009 1:49 am
Location: IN, Batesville
Name: Kyle
Vehicle Year: 2006
Vehicle: Chevrolet TrailBlazer
DriveTrain: 4WD w/ Aftermarket Locker
Rank: Extreme Offroader


Return to Differentials / Axles