What did you do to your GMT today?

[TBYODA]

Nice King.

Why does everyone take pictures of there new lights looking at them for the most part? It really does nothing to show the light output or light coverage as seen from inside the vehicle.

[Jrgunn5150]

I take a pic from inside and outside, but they are misleading.

I did HIR2 bulbs in my TB and in my 95 GMC and it made a dramatic difference. In pics, they just look like lights lol.

[Jrgunn5150]

To me, they aren't nearly as telling as seeing it in person

[DirtyBacon04]

Freshly painted rims, freshly painted grille, new fuel pressure regulator, and best of all...
NEW TIRES!
Ordered a set of BDS Fox2.0 gas shocks for the rear because the bushings on my old white body hydraulic ones are toast, and these have about 80-90k miles on them. About time for a new set.

[Trail X]

Looks tidy Bacon. Its asking to be drowned somewhere in a Florida swamp.

[KingBird]

I dunno, maybe because it's practically impossible to accurately capture the light output without seriously expensive equipment...

Maybe that's it?

You know how bright regular headlights are from meeting them on the highway and I stated in my build thread that I can see from telephone poles to telephone poles at night (when there are telephone poles on each side of the road). I don't know about you, but being able to see 20 yards off each side of the road at night with the spots outshining the brights distance-wise, is pretty awesome.

I mean yeah, they aren't KC Daylighters, but they aren't pencil beams like the KCs are either.

What I guess I'm saying is, they're worth the $40 a piece that they cost...

[Trail X]

Oh boy, don't compare your headlights to KC Daylighters... KCs are pretty much bottom of the barrel products that found some sort of cult following among rednecks in the 80s.

[Rickalicka18]

Engine light gone! Heard one of the most manly clicks of my life when I put that new gas cap on.

[Chris68chevy]

Worked on part of what needs to be done for the truck to prepare for the May trip. Awhile back while on a job a customer gave me an old Cobra 19XS Cb radio. It didn't come with a bracket, a mic holder, or a power supply. So I made a power supply and brackets and mounted it up today. I have my antenna on the way and I have access to all the wiring for it one could need. I'll be installing my power inverter later today as well.

[Jrgunn5150]

My nephews Trailblazer has white face gauges too, and I asked him if he put them in (because he's kind of a tool and not capable of basic mods lol), and he just stuttered and wandered off. Like,I don't care what you spend your money on lol.

So anyway, did you put them in?

[Chris68chevy]

My nephews Trailblazer has white face gauges too, and I asked him if he put them in (because he's kind of a tool and not capable of basic mods lol), and he just stuttered and wandered off. Like,I don't care what you spend your money on lol.

So anyway, did you put them in?

My gauge faces are actually silver with blue needles from a Buick, if you're asking about mine. They were a direct swap, I had to add momentary buttons for the DIC function to work though.

[Jrgunn5150]

Ah, that looks pretty good! Thanks for the info!

[Chris68chevy]

Ah, that looks pretty good! Thanks for the info!

Thanks! The steppers in mine went out, plus I wanted the DIC function so this was a win win for me.

[Rickalicka18]

Finally have VISIBLE front blinkers (again).

[HawkeyeC25]

Started work on the bumper kit from MDB Fabrications!!

[v7guy]

Looks like a good start!

[HawkeyeC25]

Bars are on - having to do a bit of work to fit the base plate with the bumper and skid plate. Still a bit more fabricating on the bars to do.

[Aries]

Now 4weeks later. Behind schedule and over budget but it's getting there

SWAPPED IN TRANSMISSION
NEW TRANSMISSION FILTER & PAN W/DRAIN PLUG
SWAPPED TRANS COOLER
FLUSHED TRANS WITH NEW FLUID
SWAPPED FRONT & REAR DIFFERENTIALS TO 4.56
REBUILD 4WD FRONT DISCONNECT
INSTALLED NEW REAR PINION BEARINGS AND SEAL
SWAPPED Z71 REAR SPRINGS W/ 3" BLOCKS
NEW FRONT AND REAR DRIVE SHAFT U-JOINTS
INSTALLED REAR 5 LINK
MOVED REAR AFT 1”
FLIPPED & SWITCHED UPPER CONTROL ARMS
NEW U/L BALL JOINTS & OUTER TIE RODS
SWAPPED IN RADFLO COIL OVERS
INSTALLED NEW O2 SENSORS
NEW FUEL FILTER
NEW THERMOSTAT
NEW WATER PUMP
NEW CAMSHAFT ACTUATOR SOLENOID
CLEANED THROTTLE BODY
NEW SPARK PLUGS & AIR FILTER
INSTALLED 3” BODY LIFT
SWAPPED 4WD TCCM
REPLACED LEFT REAR PASSENGER WINDOW POWER REGULATOR
INSTALLED NEW HELLA LIGHTS ON FRONT BUMPER
NEW POWER STOP BRAKES ROTORS AND PADS ALL 4 CORNERS

[Anthony Hernandez]

Good god! Tht thing is up there! Good fukin work bro!

[Jrgunn5150]

Now 4weeks later. Behind schedule and over budget but it's getting there

I'd say so, nice progress!