Just starting.. any pointers?

[mason10198]

Hey guys, this is only my second post on offroadtb, but I have used this site a million times in my past research. I have not had my TB for much time (got her less than a year ago), but I am getting ready to start building step by step. Currently, the only exterior modifications I've done are headlights and Delta A/Ts on stock rims. I have a list of things I want to do next, but I'm sort of a newbie and am open to any better ideas you guys might have (also, in what order I should do the modifications). Here is my current to-do list, ordered from most to least expensive. Please leave suggestions! (time of purchase [stock] and current progress pics are also attached below list)

Go Rhino 3075B Grille Guard
http://goo.gl/85hbJb

1.5in Wheel Spacers
http://goo.gl/3FEqwC

Leveling Kit
http://goo.gl/zJYD9a

Also going to add a LED lightbar onto the roof/top of windshield and another (smaller) LED lightbar onto the gorhino guard, just havent figured out what I'm going to get. Help here would also be appreciated!

STOCK AND CURRENT PROGRESS PICS
(in order of oldest-newest)

(100% stock) right before driving her off the lot

stock2.jpg (36.72 KiB) Viewed 19012 times

(100% stock) right before driving her off the lot

stock1.jpg (34.32 KiB) Viewed 19012 times

new Delta A/Ts on the way home from car lot

new Delta A/Ts on the way home from car lot

new Delta A/Ts on the way home from car lot

new Delta A/Ts on the way home from car lot

painted the bowtie and installed HIDs

HIDs

also did some major interior cleaning (whoever owned her before me wasn't very nice to her)

[Anthony Hernandez]

You should check out some of these guys builds and get an idea on what you are looking for man.

[mason10198]

You should check out some of these guys builds and get an idea on what you are looking for man.

I know. The to-do list is what I'm wanting to do, just open to suggestions like "better front guard" or any other "essentials" I might need.

[tarsh]

I agree with Anthony. Look through build treads.. I can almost guarantee you to do list will double in size. And welcome aboard buddy, hope to see lots of progress.

[tarsh]

Speaking of build threads.. I need to update mine really really bad

[TBYODA]

Skip that grill guard aka damage multiplier. As the only thing there good for is looks and mounting lights. They attach the the radiator mounts and one slight tap will push your radiator into your fan and most likely damage it along with most of the front of your TB. Spend the $$ on a radiator skid plate from MDB fabrication there close to same money and much more worth it. IMHO.

[mason10198]

Skip that grill guard aka damage multiplier. As the only thing there good for is looks and mounting lights. They attach the the radiator mounts and one slight tap will push your radiator into your fan and most likely damage it along with most of the front of your TB. Spend the $$ on a radiator skid plate from MDB fabrication there close to same money and much more worth it. IMHO.

I have done a lot of research on the front end guards and I agree with you. that's why I am only looking at ones that quad mount directly into the main frame of the truck. the one I was originally looking at was the WAAG Center Guard. the same one James Downing had before he got the custom bumper. are those any better or are they still bad...? I need something on the front to get my smaller AUX lights on. and as for the radiator guard, I'm looking at them right now and adding to the list.

~Sent from Tapatalk for Android~

[tarsh]

Any of them store bought guards are garbage in my opinion. That are made for looks... Quad mount or not. They are thin cheaply built curb appeal. But that's just my opinion. James ran the waag so it had to be some kind of something. But still. I'd rather see you with something that would save you from a deer, not a fly

[mason10198]

Any of them store bought guards are garbage in my opinion. That are made for looks... Quad mount or not. They are thin cheaply built curb appeal. But that's just my opinion. James ran the waag so it had to be some kind of something. But still. I'd rather see you with something that would save you from a deer, not a fly

yeah me too. the Go Rhino in my to-do list up there is very similar to the WAAG from what I've seen. I looker up some front end collisions with those installed and they seem pretty tough, not that it gives you any info on rad protection though... I will have SOMETHING on the front no matter what because Im putting lights there. you said anything "store bought" was bad in you opinion. do you have any suggestions?

~Sent from Tapatalk for Android~

[tarsh]

I don't know how handy you are but you could always make your own like I did Or like yota said, Mdb fabrication. He's a great guy on here that builds straight yp Offroad bumpers for the tb. With multiple different options. Look into michael Barton. He's good people.

[mason10198]

I don't know how handy you are but you could always make your own like I did Or like yota said, Mdb fabrication. He's a great guy on here that builds straight yp Offroad bumpers for the tb. With multiple different options. Look into michael Barton. He's good people.

well I'm only 17 and not really the one for fab work LOL (am good with basic-moderate welding though), but I'll certainly look into some other options. thanks!

~Sent from Tapatalk for Android~

[mason10198]

Okay, so with further thought and research, I agree with skipping the front guard completely. If I'm not going to get protection out of a guard, then the only other reason to get one is looks or mounting lights, and looks isn't worth $300, and I will already have a 50in led bar on the top of the windshield so another 20incher isn't going to be much of a "boost". instead of getting a front guard, I'll go for a radiator skid, which seems to be a much better priority.

Anybody have suggestions on 50inch curved LED bars? please don't say Ridgid... those things are $$$$$. something less than $200 maybe?

~Sent from Tapatalk for Android~

[TBYODA]

Don't toss the 20" led bar idea out just because your have nowhere to mount it . Think outside the box, lots of ideas in the build threads. However since you have a TB LS here is one easy solution. Get yourself some 1" square tube and flat stock say 1 1/2" - 2" wide and 1/8" thick. Heck you could use flat stock for everything.
If you remove your grill you will see these two bolts that hold the bumper cover on. You can use them to mount a bracket that you make with the above items. Just measure/cut as needed and bolt together and mount the bar. Very simple.

[mason10198]

Don't toss the 20" led bar idea out just because your have nowhere to mount it . Think outside the box, lots of ideas in the build threads. However since you have a TB LS here is one easy solution. Get yourself some 1" square tube and flat stock say 1 1/2" - 2" wide and 1/8" thick. Heck you could use flat stock for everything.
If you remove your grill you will see these two bolts that hold the bumper cover on. You can use them to mount a bracket that you make with the above items. Just measure/cut as needed and bolt together and mount the bar. Very simple.

ImageUploadedByTapatalk1442628725.057790.jpg

hmmmm... I never thought about those! taken the front end apart more times than I can remember and I know exactly what those are, just never thought about the mounting idea. man, I really need to start digging around in these threads more... thanks!!

~Sent from Tapatalk for Android~

[TBYODA]

It's ok glad to help that what we're all here for.