2500HD TRE RC Sleeve
56 posts
• Page 3 of 3 • 1, 2, 3
- Norcrosski
- Off-Roader
- Posts: 149
- Joined: Wed Jul 24, 2013 12:45 pm
- Location: Nc, Robbinsville
- Name: Andrew
- Vehicle Year: 2002
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ G80
- Norcrosski
- Off-Roader
- Posts: 149
- Joined: Wed Jul 24, 2013 12:45 pm
- Location: Nc, Robbinsville
- Name: Andrew
- Vehicle Year: 2002
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ G80
The sleeve number was pulled right from this thread 1103
- Norcrosski
- Off-Roader
- Posts: 149
- Joined: Wed Jul 24, 2013 12:45 pm
- Location: Nc, Robbinsville
- Name: Andrew
- Vehicle Year: 2002
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ G80
Is it the right TRE? Do you have a pair of micrometers you can measure it with? Maybe the wrong part put in the packaging? The sleeve won't fit the moog without reaming, it shouldn't even slide over it.
build thread
All things in moderation, including moderation.
Some people never go crazy... what truly horrible lives they must lead
All things in moderation, including moderation.
Some people never go crazy... what truly horrible lives they must lead
-
v7guy - Moderator
- Posts: 3712
- Joined: Wed Mar 09, 2011 10:17 pm
- Location: NY, long island
- Name: Jason
- Vehicle Year: 2004
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD
- Rank: Offroad Rated
but it does fit Ac Delco perfectly, maybe the aftermarket is smaller. I did have that problem with the bushings in Mevotech being a thousands of an inch off?
-
Moots1288 - Veteran
- Posts: 1964
- Joined: Fri Feb 24, 2012 8:42 pm
- Location: Long island
- Name: Moots
- Vehicle Year: 2006
- Vehicle: GMC Envoy
- DriveTrain: 4WD
- Rank: Offroad Rated
I tried an ac delco today at a dealership and it did not fit it same issue a buddy replaced and outer today on his 2500hd and same issue I have the correct inner and outer tie rods so far I've tried it on 9 different inners
- Norcrosski
- Off-Roader
- Posts: 149
- Joined: Wed Jul 24, 2013 12:45 pm
- Location: Nc, Robbinsville
- Name: Andrew
- Vehicle Year: 2002
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ G80
I wonder what year you're getting parts for. I recall there being a diameter change similar to our 14/16 mm thread change. I bet you have old 14mm thread tres and you probably need 16mm tres.
-
Trail X - Founder
- Posts: 9925
- Joined: Mon Sep 07, 2009 10:22 pm
- Location: VA, Roanoke
- Name: James Downing
- Vehicle Year: 2005
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ Aftermarket Locker
- Rank: Expedition Guide
I found out the 07 inner will thread into my rack correctly and I did have stock 14mm but it will work so iam happy with tht
- Norcrosski
- Off-Roader
- Posts: 149
- Joined: Wed Jul 24, 2013 12:45 pm
- Location: Nc, Robbinsville
- Name: Andrew
- Vehicle Year: 2002
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ G80
01 to 10 2500 hd takes 1144 this is my falut I have always had good luck just pulling part numbers from here and not having to double check them
- Norcrosski
- Off-Roader
- Posts: 149
- Joined: Wed Jul 24, 2013 12:45 pm
- Location: Nc, Robbinsville
- Name: Andrew
- Vehicle Year: 2002
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ G80
Sorry, so what was your resolution? You got the 16mm HD tres and it worked fine with your rack and the sleeve?
-
Trail X - Founder
- Posts: 9925
- Joined: Mon Sep 07, 2009 10:22 pm
- Location: VA, Roanoke
- Name: James Downing
- Vehicle Year: 2005
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ Aftermarket Locker
- Rank: Expedition Guide
So it was the wrong sleeve? I hope we didn't posted the wrong part number.
It's not how fast you go. It's how quick you get there. Lifted TBSS Build
-
ErikSS - Lifer
- Posts: 2044
- Joined: Fri Apr 26, 2013 5:23 pm
- Location: IL, Flossmoor
- Name: Erik
- Vehicle Year: 2008
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ Limited Slip
- Rank: Offroad Rated
I called rc today they told me 1103 was a sleeve for 1500 but tht 1144 was the sleeve I needed for an 07 2500 tie rod but they are letting me swap I just have to pay to ship the sleeves back tht I already have
- Norcrosski
- Off-Roader
- Posts: 149
- Joined: Wed Jul 24, 2013 12:45 pm
- Location: Nc, Robbinsville
- Name: Andrew
- Vehicle Year: 2002
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ G80
I'm sorry for the confusion. That 1144 sounds familiar. I'll have to check mine.
It's not how fast you go. It's how quick you get there. Lifted TBSS Build
-
ErikSS - Lifer
- Posts: 2044
- Joined: Fri Apr 26, 2013 5:23 pm
- Location: IL, Flossmoor
- Name: Erik
- Vehicle Year: 2008
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ Limited Slip
- Rank: Offroad Rated
It does seem odd that 2500 would be skinnier than 1500. Maybe someone needs to look into the 1500 TREs!
It's not how fast you go. It's how quick you get there. Lifted TBSS Build
-
ErikSS - Lifer
- Posts: 2044
- Joined: Fri Apr 26, 2013 5:23 pm
- Location: IL, Flossmoor
- Name: Erik
- Vehicle Year: 2008
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ Limited Slip
- Rank: Offroad Rated
Hmm I just looked it up and you're correct but that was written with my receipt in my hand with the part number. I could have made a mistake but but thats a weird mistake.
-
Moots1288 - Veteran
- Posts: 1964
- Joined: Fri Feb 24, 2012 8:42 pm
- Location: Long island
- Name: Moots
- Vehicle Year: 2006
- Vehicle: GMC Envoy
- DriveTrain: 4WD
- Rank: Offroad Rated
Like I said I've never had a doubt on here before but I will at least check next time but I enjoy ever right up and I read a mark them for future reference
- Norcrosski
- Off-Roader
- Posts: 149
- Joined: Wed Jul 24, 2013 12:45 pm
- Location: Nc, Robbinsville
- Name: Andrew
- Vehicle Year: 2002
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ G80
56 posts
• Page 3 of 3 • 1, 2, 3