This post is over in the random picture tread thought it should be here also.
Funny story. During my install of the 2" rear spring spacer and Z71 springs I had to remove the end links to make it possible for easy install. So I just tie wrapped the bar up out of the way with the intent of removing it. Sort of forgot about it until hitting a few rocks at TECORE and one finally did this.

Yes I know I also did not remove stock spare.

After much group discussion and few on shit moments on my part. I was able to get a txt message out to JD via v7guy (jason) to bring a sawzall and blade however I did not get a reply if JD got the message. So we tried using a partly worn hack saw to cut it with little success. My buddy Scott suggested we put tow strap on the two ends and we used TrailShaman (Jamie) winch to pop it back over the axle and we removed it. Guys wanted me to mount the sway bar to my hood as horns. Hmm No

I guess you can say Dave and I got the Yoda mobile by the horns.