Help with light bar placement
5 posts
• Page 1 of 1
Hey guys I'm new here to ortb. Hoping someone on here has done what I'm trying to do or would have some ideas. I have a curved led light bar approximately 32 inches long. I'm wanting to mount it on the front bumper grill area. The only way I can see is getting a bull bar first and then mounting it on to there. I was hoping to mount it to existing metal on the trailblazer. If anyone has other ideas or has any success doing this previously please let me know! Any and all help would be appreciated.
- Taytayholl
- Newbie
- Posts: 1
- Joined: Thu Jan 12, 2017 6:15 pm
- Name: Taylor
- Vehicle Year: 2008
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD
There's always the hood...
Could try and mount it to the grill, but it wouldn't be very secure. Or if you're not adverse to drilling through your bumper cover, there's always that option.
Could try and mount it to the grill, but it wouldn't be very secure. Or if you're not adverse to drilling through your bumper cover, there's always that option.
- Diacom
- Addict
- Posts: 881
- Joined: Fri Jul 23, 2010 9:08 pm
- Location: NV, Yerington
- Name: Noel
- Vehicle Year: 2003
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ Aftermarket Locker
I went with a 20 behind the grill.
- Attachments
-
2007 i6 4x4 TB
2 inch BDS Lift with bilstiens upfront
275/65/18 Crosswind A/T
Quick disconnect swaybar endlinks
2 inch BDS Lift with bilstiens upfront
275/65/18 Crosswind A/T
Quick disconnect swaybar endlinks
- oefootball_70
- Cruiser
- Posts: 25
- Joined: Sun Sep 27, 2015 9:40 am
- Name: Ryne
- Vehicle Year: 2007
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD
Taytayholl wrote:Hey guys I'm new here to ortb. Hoping someone on here has done what I'm trying to do or would have some ideas. I have a curved led light bar approximately 32 inches long. I'm wanting to mount it on the front bumper grill area. The only way I can see is getting a bull bar first and then mounting it on to there. I was hoping to mount it to existing metal on the trailblazer. If anyone has other ideas or has any success doing this previously please let me know! Any and all help would be appreciated.
You could always make a bracket that mounts to the bolts that holds the bumper cover on. These are under the grill.
2008 TB Radflo coil overs, Z71 rear springs, 2" spacer, skyjacker N8030 shocks, LT285/75R16E Goodyear MTR
My Build ----- MY Youtube Channel
My Build ----- MY Youtube Channel
-
TBYODA - Moderator
- Posts: 1760
- Joined: Mon Apr 01, 2013 9:07 pm
- Location: NY, Rochester
- Name: Robert Sengillo
- Vehicle Year: 2008
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ Limited Slip
- Rank: Offroad Rated
Reviving an old post here; how did this work out? I am looking to do the exact same thing with a 20inch bar. IS the light output decent?
- Jordan616
- Newbie
- Posts: 4
- Joined: Sun Oct 22, 2017 6:17 pm
- Name: Jordan
- Vehicle Year: 2006
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD
5 posts
• Page 1 of 1