I just purchased a 3" lift kit from Mark. After reading everything I could related to my front end build it seems I have it all wrong. I was gonna use the Moog 811114 springs. Seems they can rip out the upper bushings. Was leaning toward the Skyjackers with no puck in the rear. Eric SS I tried to message you but seems I am an idiot.
Help!
Springs and things
4 posts
• Page 1 of 1
- Feets001
- Cruiser
- Posts: 30
- Joined: Sat Jun 06, 2015 5:58 am
- Name: Leon
- Vehicle Year: 2003
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ G80
The 114 should be ok with the 3 inch kit. They are close to the 88's I ran with the 3 inch kit. I like the skyjacker rears. Best rear set-up I have used.
they've always worked for me.
-
HARDTRAILZ - Moderator
- Posts: 6342
- Joined: Sat Sep 12, 2009 1:49 am
- Location: IN, Batesville
- Name: Kyle
- Vehicle Year: 2006
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ Aftermarket Locker
- Rank: Extreme Offroader
Love my skyjackers
- Norcrosski
- Off-Roader
- Posts: 149
- Joined: Wed Jul 24, 2013 12:45 pm
- Location: Nc, Robbinsville
- Name: Andrew
- Vehicle Year: 2002
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ G80
I'm just gonna do the tb ext springs and 3" with wheel spacers going to be my light duty hunting rig
SMELLS LIKE HARD WORK AND DEDICATION
- Trailblazin Ahead
- Member
- Posts: 87
- Joined: Wed Dec 10, 2014 5:36 pm
- Location: CA, BAKERSFIELD
- Name: Tyler
- Vehicle Year: 2005
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD
4 posts
• Page 1 of 1