Great Deal on some Dodge D60's

[Diacom]

Guys,

Here's a listing for some D60's from the Bh4Weeler site.

front
Dodge kingpin 5.38s w/spool
Superior axles and longfield joints with drive flanges
thick cover from ruffstuff
all new bearings,kingpins and brakes when I built this
Rear
Custom built high pinion full floater(thanks axle)
5.38s w spool
ruffstuff cover
Branik moly shafts with Spidertrax flanges
All new bearings and brakes when built

..front has ballistic fab high steer arms and .5 wall drag link and tierod with heims. Also has PSC hydro ram

http://www.bh4wheelers.com/bh4bb/YaBB.pl?num=1329403835

He's on the East side of South Dakota so take that into consideration if your interested.

Also, front is a passenger side output... Otherwise I would jump on this myself but new T-case, exhaust etc would be a pain. And I bought his ford D60 HP front and 14 bolt rear stockers today. He did mention he would take $2500 for both axles as he needs to get them moved hopefully by the end of March. I figure atleast $4500 if not more in axles here.

Guys name is Tim Star @ 605-359-2134, and asked that if I knew of anyone interested to let em know.