navigator wrote:I know Mark suggests the skyjacker H7030 as an affordable option for the rear. I seem to recall the N8030 as an upgraded version.
Keep in mind that you'll have to get some grade 8 washers to fill in the gap between the shock and shock mount for those.
You could also go the BDS route, they don't require the washers. For more info on them you can search this thread that I have bookmarked.
viewtopic.php?f=15&t=260&start=20
I'm probably a little late but instead of using washers I cut the bushings out of my stock shocks and cut off all the rubber so they would fit in the red rubber that came with the N8030 and had no slack. You can use washers though I just wanted to do it right the first time!
