Offroad Trailblazers and Envoys

Brakes???

BDS, ReadyLift, Smaxx... You name it, we know about it here.

by cbbryan » Sat Nov 20, 2010 7:33 pm

It has come to my attention that I need new brakes (mainly rotors). My pads are still fine for now but my rear rotors need to be machined to correct pulsing and my front need to be replaced due to cracks. Any suggestions for the type of rotors and pads to replace with. I was looking at the Duralast rotors and pads from autozone which would cost less than $300 for 4 new rotors and all the pads, or I could take it to the shop and they would do it for around $500. I want a top quality product and I want to save money. I have never done this before either. Any advice on what type of brakes/rotors to use or if I should just take it to a shop to let them do it?
User avatar
cbbryan
Trail-Blazer
 
Posts: 270
Joined: Tue Sep 22, 2009 2:26 pm
Location: MS, Amory
Name: Chris
Vehicle Year: 2005
Vehicle: Chevrolet TrailBlazer
DriveTrain: 4WD

by janesy86 » Sat Nov 20, 2010 8:03 pm

I got drilled/slotted rotors w/ pads front and rear from a seller on eBay that many people on the OS have used. Forgot the name, but great product and price. I believe $250 total.

Had my Dad help me install since it would be my first brake job and since he was a mechanic I had faith. Even after tho it wasn't a tough job to do and can now do alone, I wouldn't have attempted it myself w/o help.
Build Thread
Back to stock, had fun while it lasted...
janesy86
Veteran
 
Posts: 1291
Joined: Thu Sep 10, 2009 2:29 pm
Location: MA, Salem
Name: Nick Janes
Vehicle Year: 2007
Vehicle: Chevrolet TrailBlazer
DriveTrain: 4WD w/ G80
Rank: Offroad Rated

by rgraboske » Sat Nov 20, 2010 8:21 pm

I did Centric Rotors and pads on the front last time. Not slotted or cross drilled, but when I was doing my research, they are rated for auto-cross, etc.

There is a lot of brake dust, but they stop great. The rotors still look good too. I'll be migrating all of my other cars to Centrics as they need brakes.
rgraboske
Trail-Blazer
 
Posts: 338
Joined: Wed Feb 24, 2010 2:17 pm
Location: MI, Royal Oak
Name: Rob Graboske
Vehicle Year: 2002
Vehicle: Chevrolet TrailBlazer
DriveTrain: 4WD w/ G80
Rank: Trail Ready

by MrSmithsTB » Sun Nov 21, 2010 2:31 am

janesy86 wrote:I got drilled/slotted rotors w/ pads front and rear from a seller on eBay that many people on the OS have used. Forgot the name, but great product and price. I believe $250 total.

Had my Dad help me install since it would be my first brake job and since he was a mechanic I had faith. Even after tho it wasn't a tough job to do and can now do alone, I wouldn't have attempted it myself w/o help.


Seller was brakemotive, I think. I have the full set and they work excellently.
back in the saddle
TB BUILD
User avatar
MrSmithsTB
Veteran
 
Posts: 1756
Joined: Thu Sep 10, 2009 2:28 pm
Location: EHT, NJ
Name: Bob
Vehicle Year: 2006
Vehicle: Other GMT360/370
DriveTrain: AWD w/ G80
Rank: Offroad Rated

by Regulator1175 » Sun Nov 21, 2010 6:29 pm

I went with the drilled and slotted rotors from Brakemotive on Ebay. I highly recommend them! I use ceramic pads from Advanced Auto that have a lifetime warranty. That way when I need pads its just a trip down the road, rather then waiting for new pads to be sent from the ebay-vendor. Just my two cents!
Twenty years from now you will be more disappointed by the things that you didn’t do than by the ones you did do.
So throw off the bowlines. Sail away from the safe harbor. Catch the trade winds in your sails. Explore. Dream. Discover.
- Mark Twain
--Build--
User avatar
Regulator1175
Veteran
 
Posts: 1047
Joined: Wed Mar 17, 2010 3:48 pm
Location: IN, Warsaw
Name: Matthew McClelland
Vehicle Year: 2002
Vehicle: GMC Envoy
DriveTrain: 4WD w/ G80
Rank: Extreme Offroader


Return to Lifts / Suspension