So here's the layout, 3" mark's suspension lift, 1.5" wheel spacers, 265/70/17 tires, what about the control arm flip, oh and new coils all around as well as shocks and struts. Will post picks when done. Did I miss anything needed to be done.
Pull out of piece of paper, write down what you have. Then read the forum again to see what you missed. Then consult your now updated list once more, and take time to consider what some of us have said (like shelling out the cash and getting Radflos instead). Finally make sure you did all your homework about gear ratios, tire sizes, and everything else. If questions remain, use the search button. When finished, post badass pictures!
Welcome, but please follow the posted rules for the Build Thread forum, which are different than the other forums. Navigator will be by in a bit for the clean-up.
Totally didn't realize this was in the build thread section. Usually have different titles. Sorry Roadie and Navigator. I'll go to my timeout corner now.
JorDanee, I think Roadie was reminding the OP. He doesn't have a build thread, just some discussion in the wrong topic. I've moved it to offroad discussion.
Bill, feel free to clean up my stuff if I don't get there in time!
"Please consider a search before posting. Folks on this site PIONEERED functional offroad use of these trucks." The answer to many common lift questions can be found here My Build Thread